Tshoot 2 (B2) : Released

Here it comes R&Sv5 Troubleshoot 2 (B2)
Get ready to test your skills.

Duration :- 02:00 hrs (00:30 hrs optional).

Too many devices , its hard to find out the issues within the given time.

But CCIE LAB CENTER workbook will make you solve the complete Tshoot within an hour.

Need to solve 10 Tickets – 22 points.
8 Tickets of 2 points (total 16 points) and 2 tickets of 3 points (6 points).

So, what are you waiting for, book your exam now and prepare yourself with our R&Sv5 Workbook which is simple and perfect with all the latest updates available.

Ticket 1   ( L2 Switching) – Sample

USER4 located on Vlan 2000 in Large Office should be able to ping R40’s Loopback interface. Fix the issue so that
the following sequence of commands produces the same relevant output:

USER4#ping 123.40.40.40
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 123.40.40.40, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms

USER4#traceroute 123.40.40.40
Type escape sequence to abort.
Tracing the route to 123.40.40.40
VRF info: (vrf in name/id, vrf out name/id)
1 10.4.100.253 0 msec 0 msec 1 msec
2 10.40.140.1 0 msec * 0 msec

Solution

Fault

1. OnSW400 :: Interface ethernet 2/0-1 > switchport trunk allowed vlan except 2000

Correction

1. OnSW400 :: Interface ethernet 2/0-1 > switchport trunk allowed vlan add 2000
    SW400#enable
    SW400#configure terminal
    SW400(config)#interface range ethernet 2/0-1
    SW400(config-if-range)#switchport trunk allowed vlan add 2000
    SW400(config-if-range)#exit
    SW400(config)#exit
    SW400#write
    SW400#

Verification :-